Charging Ahead: Developments Reshaping Malaysia’s EV Industry
Introduction
The global push towards decarbonisation is reshaping the energy landscape, and Malaysia is accelerating towards a more sustainable and electrified future through the adoption of electric vehicles (“EVs”). What was once a peripheral segment of the automotive market is now a central pillar of Malaysia’s transport and energy transition strategy, and it is backed by a growing suite of national policies, investment targets, and regulatory frameworks.
Roadmap Steering the Transition
Malaysia’s transition towards electric mobility is guided by a framework of national policies designed to promote EV adoption while strengthening the domestic automotive industry. Among the principal policies include the National Automotive Policy (“NAP”) 2020 and the New Industrial Master Plan (“NIMP”) 2030 complemented by the National Energy Policy 2020–2040 and the Low Carbon Mobility Blueprint 2021 – 2030.[1]
Under NAP 2020, EV development is identified as a key growth driver, alongside Next-Generation Vehicles, Industry 4.0 integration, and mobility-as-a-service. The policy aims to enhance Malaysia’s position as a regional leader in automotive manufacturing, while encouraging local and foreign stakeholders to invest in research and development, and engineering activities within the EV value chain. NAP 2020 further complements ambitions under the National Energy Transition Roadmap (“NETR”), which targets EVs to account for 80% of Malaysia’s total industrial vehicle volume by 2050.
The NIMP 2030 lends greater substance for EV development through a mission-based approach to industrial transformation. The plan links EV development with Malaysia’s National Investment Aspirations (“NIA”)[2], which aim to accelerate EV adoption in support of the decarbonisation of Malaysia’s transportation sector.[3] To coordinate these initiatives, the National EV Steering Committee (“NEVSC”) and a National NIMP 2030 Council have been established to lead the country’s electro-mobility ambitions.[4]
Guidelines on Electric Vehicle Charging Systems
The availability of EV models will not alone ensure widespread adoption. A reliable and accessible Electric Vehicle Charging System (“EVCS”) infrastructure is essential to this transition. Recognising this, Malaysia has progressively introduced regulatory guidelines to support infrastructure deployment and ensure consumer safety.[5]
On 24 February 2025, Malaysia’s national energy regulator, the Energy Commission (Suruhanjaya Tenaga), issued the Guidelines on Electric Vehicle Charging System (“Guidelines”).[6] The Guidelines provide greater clarity by outlining compliance obligations, defining the roles for market participants and prescribing technical safety standards applicable to EV charging infrastructure.
While earlier guidance issued in 2024 addressed licensing and general regulatory oversight, the Guidelines establish a more structured and comprehensive framework governing the EV charging ecosystem.
(Our previous article which addresses the Guide on Electric Vehicle Charging Systems released in 2024 may be accessed here.)
Objectives of the EVCS Guidelines
The EVCS Guidelines serve several key objectives. The Guidelines aim to:
(a) Specify safety requirements for EVCS in accordance with the Electricity Supply Act 1990.
(b) Outline applicable technical standards and methods of implementation.
(c) Set out roles, functions and responsibilities of parties involved in the design, installation, operation and maintenance of EVCS infrastructure.
(d) Define approval requirements for the purpose of Electric Vehicle Supply Equipment (“EVSE”).
(e) Address ancillary matters relating to EVCS deployment and operation.
In effect, the EVCS Guidelines provide not only technical guidance but also serve as a comprehensive reference framework for stakeholders across the EV charging ecosystem.
Scope of Application
The Guidelines apply to all entities involved in the EV charging value chain, including:
(a) Charge Point Operators (“CPO”), being registered entities that owns, operates, and maintains one or more charging station or charging point where an EV can be recharged.
(b) Manufacturers, importers, sellers, advertisers and distributors of EVSE.
(c) Electrical contractors, competent persons, consulting engineers and EVCS service providers.
(d) Any entity intending to install, operate or maintain EVCS.
EV Charging Modes and Technical Standards
The EVCS Guidelines specify four (4) modes of conductive EV charging in accordance with international standards provided under International Electrotechnical Commission (IEC): 61851-1:
(iii) Mode 1 – charging directly from a standard power outlet and of which is expressly prohibited to be used.
(iv) Mode 2 – alternating current (“AC”) charging via standardised plug and cable assembly incorporating an in-Cable Control and Protective Device.
(v) Mode 3 – AC charging through a permanent connection with a control pilot function for communication between the EVCS and the vehicle’s on-board charger.
(vi) Mode 4 – direct current (“DC”) charging via an off-board charger, delivering direct current to the EV battery, bypassing the on-board charger, providing the fastest charging option and supports higher power ratings.
Installation and Maintenance Requirements
Beyond charging modes, the EVCS Guidelines introduces more prescriptive requirements governing the installation and maintenance of EVCS:
(a) Charging equipment must be supported by dedicated electrical circuits, fitted with appropriate overcurrent and earth leakage protection mechanisms.
(b) Protective devices must be calibrated to circuit ratings, with more stringent relay-based protection for higher-capacity systems.
(c) Baseline physical and environmental requirements are prescribed, including minimum socket heights and ingress protection ratings for indoor and outdoor charging equipment enclosures.
(d) All electrical work must be undertaken by a competent person, with appropriate personal protective equipment deployed where required.
(e) Detailed records relating to design, construction, testing, operation and maintenance must be maintained and made accessible to authorised parties.
Licensing Requirements
While the EVCS Guidelines do not create new licensing regimes, all activities under the Electricity Supply Act 1990 remain subject to statutory licensing. In particular, any person who uses, operates or permits the use or operation of an EVCS installation or supplies electricity to another person through such a system must obtain the appropriate licence from the Energy Commission.
Additionally, any person intending to manufacture, import, display, sell or advertise EVSE must first obtain a Certificate of Approval (for Mode 2 and Mode 3 chargers) or a release letter (for Mode 4 charges) before marketing their equipment[7].
Challenges and Future Outlook
Malaysia’s transition towards electric mobility represents a significant shift in both its transportation system and energy landscape. While policy-driven incentives, strategic investment and guidelines provide the foundation for EV adoption, limitations remain, such as infrastructure readiness, cost considerations, and technical capability across the industry.
Nevertheless, Malaysia’s long-term commitment to electrification is clear. As regulatory clarity improves and market participation expands, EVs are poised to become an increasingly prominent feature of the nation’s automotive sector. Stakeholders should therefore monitor evolving regulatory developments and compliance expectations to effectively position themselves within this rapidly evolving industry.
The EVCS Guidelines are available here.
This article was authored by Dato’ Brian Law (Head), Tommy Wong (Senior Associate) and Venecia Wong (Associate).
[1] Malaysian Investment Development Authority, ‘Electrifying Progress: A Deep Dive Into Malaysia’s Automotive Scene and Electric Vehicle Ecosystem, < https://www.mida.gov.my/electrifying-progress-a-deep-dive-into-malaysias-automotive-scene-and-electric-vehicle-ecosystem/ > accessed on 13 February 2025
[2] Kenanga, ‘The Future of Mobility. Electrifying Malaysia: Paving the way for widespread EV adoption’, page 1.
[3] Tham Siew Yean, “The Critical Role of Electric Vehicles in Malaysia’s New Industrial Master Plan (NIMP 2030)” ISEAS Yusof Ishak Institute Perspective, Issue 2023 No.81, page 15 – 17
[4] Ibid. page 20
[5] The Malaysian Reserve, ‘EV, battery management guidelines strengthen Malaysia’s EV ecosystem’, <https://themalaysianreserve.com/2024/10/30/ev-battery-management-guidelines-strengthen-malaysias-ev-ecosystem/ > accessed on 13 February 2025.
[6] Guidelines on Electric Vehicle Charging System (EVCS), Energy Commission, dated 24 February 2025
[7] Guidelines on Electric Vehicle Charging System (EVCS), Energy Commission, dated 24 February 2025
Key Contacts
Please contact our team if you have any questions.
Dato’ Brian Law | Head, Corporate and Commercial